Lead-in: Many cold storage projects need both fresh-keeping and freezing rooms. Installing two separate refrigeration systems drives up cost and clutters the machine room. Built on the Suzhou Corestar UX1 programmable controller, this parallel compressor solution lets a single controller manage two independent refrigeration circuits — combining stability, energy efficiency, and easy commissioning.
The headaches every cold storage contractor knows
If you work on cold storage projects, these problems probably sound all too familiar:
👉 A client needs both a fresh-keeping room and a freezing room. Building two separate systems doubles the equipment cost, adds more piping, and the machine room runs out of space.
👉 Cooling load swings wildly between high and low season. During peak loading the system can’t keep up; during idle periods it’s “a big engine pulling a small cart,” and electricity bills stay painfully high.
👉 One failed compressor shuts down the entire cold room. Product is at risk, and the financial damage adds up fast.
👉 Every project needs a different number of compressors and different sensors. The controller hardware isn’t reusable, so you have to stock multiple versions and rework the board each time.
👉 Poor oil return shortens compressor life. Machines break down early, and commissioning eats up valuable time.
👉 Adjusting parameters on site is tedious, and adding remote monitoring means costly retrofits.
If any of this sounds like your daily reality, keep reading. In this article we introduce a practical, field-proven solution: a dual-circuit parallel compressor control scheme developed on the Suzhou Corestar UX1 programmable controller, purpose-built for small- and medium-sized cold storage facilities. One controller manages both a medium-temperature and a low-temperature refrigeration circuit — no second electrical panel required.
One controller, two independent circuits: fresh and frozen, managed separately
The solution divides the system into two independent refrigeration circuits that share one condensing unit:
- Medium-temperature circuit (MT): drives up to 4 compressors — ideal for fruit, vegetable, and fresh-meat storage rooms.
- Low-temperature circuit (LT): drives up to 2 compressors — suited for frozen storage.
Each circuit sets its own temperature and pressure targets independently, so the two rooms never interfere with each other. Because you no longer need two separate electrical systems, the machine room holds fewer components — saving your client on both equipment and installation costs.
This dual-circuit architecture is especially valuable for multi-temperature cold storage projects, where a single job simultaneously demands chilled and frozen capacity. Instead of procuring, wiring, and maintaining two standalone control systems, the project gets one cohesive, centralized platform — fewer failure points, simpler wiring, and one unified interface to operate.
Corestar UX1 software-configurable I/O: one hardware platform fits any project
The Corestar UX1 is a programmable controller, and its I/O channels are not hard-wired to fixed functions. Everything is assigned through parameters, giving you remarkable flexibility:
- Digital inputs (DI): connect high/low-pressure protection, compressor and fan overload, phase-sequence protection, and remote start/stop.
- Digital outputs (DO): control compressor and fan contactors.
- Analog outputs (AO): deliver 0–10 V signals to drive variable-frequency fans for speed control.
This means whether a project uses two compressors or six, and whether the sensors are NTC thermistors, PT1000 temperature probes, or 4–20 mA pressure transmitters, everything can be selected and configured directly from the panel — no hardware redesign needed.
The practical payoff for contractors is significant: you only need to stock one controller model to handle a wide range of projects. This cuts inventory, shortens commissioning time, and simplifies spare-parts management. When a client changes their compressor lineup or sensor type mid-project, the same UX1 simply gets re-configured in software — a level of adaptability that traditional fixed-I/O controllers simply cannot offer.
A wide range of compressor options, with automatic capacity matching
The complete control logic runs on the UX1 and supports a flexible mix of compressor technologies:
- The medium-temperature circuit supports fixed-speed, variable-frequency (inverter), and digital scroll compressors.
- The low-temperature circuit supports fixed-speed and variable-frequency compressors.
The system automatically stages compressors based on live cooling load: when demand rises (e.g., during heavy loading), it automatically starts and adds compressors to boost capacity; when the load drops, it shuts them down in sequence. Compressors are rotated so that running hours are balanced across all units, extending the overall system lifetime and preventing premature wear on any single machine.
Two control modes are available, letting you choose whichever fits your site’s convention:
- Suction pressure control
- Saturated suction temperature control
Both approaches give stable, precise temperature regulation while minimizing unnecessary compressor cycling — directly translating into lower energy consumption and longer equipment life.
Built-in intelligent oil-return protection for longer compressor life
Oil return is one of the most common failure points in parallel compressor systems. Poor oil return can starve or damage compressors and drastically shorten their lifespan. To address this, the UX1 program includes a mature, field-tested oil-return logic:
- When compressors run at low speed for a set period, the controller automatically triggers an oil-return cycle.
- Once triggered, the oil-return task takes priority and runs to completion before the system shuts down — even if the cooling demand has already disappeared.
- If the process is interrupted mid-cycle (for example by a power cut), the system remembers the unfinished oil-return and can resume it the next time the unit starts up.
- A manual one-touch oil-return function is also available, making on-site commissioning and maintenance much easier for technicians.
This intelligent logic combines smooth capacity regulation with reliable compressor protection — a critical combination that keeps your equipment running reliably for years.
Intelligent condenser fan speed control: saving energy while keeping conditions stable
The condenser fans support both fixed-speed and 0–10 V variable-frequency speed control. Using a floating condenser-pressure control strategy, the fan speed is adjusted dynamically based on the condenser pressure combined with the ambient (external) temperature:
- In summer’s high heat, the controller holds the condenser pressure at a stable level to avoid excessive high-side pressure.
- In winter’s low temperatures, it prevents the condenser pressure from dropping too low, which can cause insufficient liquid supply and unstable operation.
Fan loading and unloading are staged with built-in delay timers, avoiding frequent start/stop shocks that stress the electrical system. The result is a more stable refrigeration cycle, smoother operation, and meaningful electricity savings over the life of the system.
Multi-level alarm and protection: reducing product-loss risk
The system ships with a complete protection logic suite, covering:
- Sensor wiring faults / disconnections
- High- and low-pressure protection
- High discharge-gas temperature
- Compressor and fan overloads
- Phase-sequence protection
Alarm behavior is configurable across several modes: no alarm, auto-reset, manual reset, or fault lockout. You can also set alarm delay times, the number of fault lockouts, and the lockout hold time to match your site’s requirements.
Crucially, if a single compressor develops a fault, the controller isolates that unit while the remaining machines continue to run. The entire cold room does not go down, so stored goods are protected — and revenue loss is minimized. This fault-tolerant architecture is a decisive advantage over single-compressor systems where one failure means total shutdown.
Touchscreen + standard Modbus: easy on-site commissioning and remote】 monitoring
The solution pairs with a local color touchscreen that shows, at a glance:
- Real-time temperatures and pressures
- Live I/O status (DI/DO/AI/AO)
- Process flow diagrams
- Operating history curves
- Alarm records
Technicians can modify parameters directly on the screen — no laptop or programming software required on site, which dramatically speeds up commissioning and troubleshooting.
For remote access, the system provides multiple Modbus-RTU communication channels:
- Touchscreen communication: 9600, 8N1
- Inverter compressor drive board: 1200, 8N1
- Host / upper computer monitoring: 9600, 8N1
These standard interfaces make it easy to connect to building management systems or cold-storage cloud platforms, enabling remote data reading, remote alarm notification, and centralized management across multiple sites.
Where this solution fits best
✅ Food-processing facility cold rooms — combined fresh-keeping and freezing in one plant
✅ Fresh-produce origin and distribution cold storage — multi-temperature warehouses
✅ Supermarket cold-chain machine rooms
✅ Small- and medium-sized cold-chain cold storage — both renovation and new construction
✅ Contractors and system integrators who want a standardized controller platform across varied projects
Summary: the core value of the solution
💰 Lower investment cost — One UX1 controller handles dual-zone parallel control, reducing electrical hardware spend and simplifying machine-room design.
⚡ Lower operating cost — Load-based compressor staging and variable-frequency fan control match actual cooling demand, eliminating wasted capacity and unnecessary energy use.
🛡️ Higher reliability — Single-unit fault isolation keeps the system running, with comprehensive oil-return and multi-level protection to reduce compressor damage and protect stored goods.
🔧 Easier delivery and service — The programmable, software-configurable UX1 uses one hardware model across projects, making commissioning simpler and after-sales support more efficient.
Ready to explore it?
If you have a cold storage project and are looking for a stable, flexible parallel compressor control solution, we’d love to talk. Reach out to learn more about this CO UX1-based parallel compressor scheme and how it can simplify your projects, lower your costs, and protect your customers’ goods.